chrisat

[chrisat]

Hello Laura,

thank you for your help and effort. I’ve deactivated this section, all is OK right now.

Best regards,
Chris

[chrisat]

Hello Laura,

thank you for your help.
Didnt work, sorry. But if – I think you got me wrong.
I dont want to remove the sliding info, but I have to costomize it.

Do you know where to find the code of it?

Thank you, Chris

[chrisat]

Hi Laura,

this is not really helpful…all plugins are on latest version – EXCEPT Revolution Slider.
When will you deliver the latest version?
Slider stopped working with your latest update…

Thanks, Chris

[chrisat]

This reply has been set as private.

[chrisat]

and WP 4.4.2

[chrisat]

Hi Radu,

I do have the latest version installed…

Cheers, Chris

[chrisat]

Hello guys,

which plugin to use and add custom code and css like shown above?
It’s a bit confusing…

Thanks for helping!

Cheers, Chris

[chrisat]

Hello Andrei,

works fine, thank you!

Cheers, Chris

[chrisat]

Thank you for explaining!

Chris

[chrisat]

Hi Andrei,

looks so – would you sell a licence?
I only need a simple one, no staff here. Would be nice to have it in the same look as KLEO. And KLEO looks fantastic…

Cheers, Chris

[chrisat]

Thank you for that hint, yes I have WPML. But honestly I am not in that so deep. Will do some research when have spare time.

Cheers, Chris

[chrisat]

Hello Andrei,

thanks for the info – but I will have to use the german WOO Version. Hopefully it works. Had no time meanwhile to test it…
The backup for the widget I have installed already, this every time new install was a mare. Not sure if the backup works, we’ll see.

Andrei, btw…what kind of support e.g. ticket system are you using here?

Cheers, Chris

[chrisat]

Andrei,

I’ve done a workaround – fixed translation:

found at:
wp-content/themes/kleo/lib/plugin-geodirectory/kleo-geodir.css

line 208 to 2014

COPY CODE

.map_category>.toggle:before{
    content: 'Ansicht filtern';
    display: inline-block;
    padding: 0 0 0 5px;
    float: left;
    border-radius: 3px;
}

Cheers, Chris

[chrisat]

Hello rikbutterflyskull,

thank you for your offer. I do have the full premium package of GD. Using some of them add ons already. You are absolutely right, they are a must. The actual issue regarding the related things is need to be solved by GD in my opinion. Location filter does not work.

Thankful for any help, whatever you can do.

Cheers, Chris

[chrisat]

Hello Andrei,

thank you for investigation. There is no messing up, just missing important features and maybe a misfunction of location filter.

Its already at GDs ticket. So its clear who made it, thanks.
Ticket can left closed.

Thank you guys, your support is really outstanding!

Cheers, Chris

[chrisat]

Andrei,

if you want more details about my discussion regarding search relations above, I can tell you a sample. I just dont know who is in charge GD or KLEO…
Also I think this should be a new ticket.

But here you see what I asked at GD:

I gave it a test again – I really think that it could work. Sometimes it does. It looks like that the location filter at the widget doesnt work every time…
Regarding this, how does the filter work? Based on ZIP or Region or distance?
This is also not easy to check…

My test is actually as follows:
DETAIL PAGE: hotel details are shown – sidebar widget shows CORRECT matching sports (OTHER post type) and shows correct hotels (same POST TYPE). Both shown post types have the same ZIP.
This could be a way to solve it, some minor changes would it make really better:

1. Dont show the OWN listed hotel or post type again, the detailed place should be excluded in the widget. Only show the others.
2. If there is no matching listing in this area, just show nothing. Much better than the error code nothing matching…

Interesting things when you search:
You search a location – same as for the sample above. Search works perfect, the correct hotels are shown. Distance of hotels are 0.19 and 3.12 kilometers.
If you add the same widget as at the sample above, sports (other post type) are shown without location filter (it is set to work!). Here you see 352, 158, 3.5, 281 kilometers and so on.

So the question is why does the same widget work at detail listing and at search listing not?
Solving this, it would work good.
If on top I would be able to set the params of location filter (best would be distance) then it should work as needed.

+++++

Cheers, Chris

[chrisat]

Hello Andrei,

thank you for your help – screens attached.

Cheers, Chris

Attachments:

You must be logged in to view attached files.

[chrisat]

Is there any way to find out WHO (KLEO or GD) made the things?
Especially search is complicated…

So it seems that the search bar is from Kleo (the beginning of this post). When using it, function is OK.
But on top in the header (Kleo framework), the result of the search is never seen. Only output is: …result for ” “.
I am also missing the bottom of the search page – who is in charge? Kleo or GD…

Cheers, Chris

[chrisat]

Hi rikbutterflyskull,

thank you so much for your help! I search alot, trust me. GD has many tasks for me. May I ask you how you use GD?
For me it is important to have multilocation and combined post types. GD told me that is not working. It does at times, but not always, especially not in search. So my next question is: could you give me a hint about Kleos ajax search and GD? Do you know how the location filter of GD works and where to set the parameters (not them at GD Panel using standard 40 miles)?

Greetings, Chris

[chrisat]

Hello again,

the same problem for the search page – on the results page the map is also not full width. Any ideas of how to cusotmize to solve this too?

Thanks for any help.

Chris

[chrisat]

Hi Andrei,

I’ve tested this very seriously. Works fine with small misfunctions and old templates. Updating them, it totally mixes up. But I am running into a new challenge: I will have to set up a special WOOCOM for german and austrian law. So this will get special, hopefully it will work as we need much more info and texts by law…

btw…switching off the theme is not that funny. Every time all sidebars and widgets, also the footer get’s lost… 🙁

Greetings, Chris

[chrisat]

This reply has been set as private.

[chrisat]

This reply has been set as private.

[chrisat]

Hi Andrei,

two replies from 2 different moderators of them…

#1 I have no idea where that comes from, that is not standard GD … ??
#2 That’s Kleo added stuff.

So you tell me also you have not idea who made it?

Dead end for me…

Greetings, Chris

[chrisat]

Hi Andrei,

thank you – to find out who made the parts is a real challenge :-). Will ask them.

A part I was sure that comes from GD seems to be from KLEO.
The filter for categories – I need to know where to find it for translation. WPML does not find it…

Please see the pic attached.

Cheers, Chris

Attachments:

You must be logged in to view attached files.

[chrisat]

This reply has been set as private.

[chrisat]

This reply has been set as private.

[chrisat]

This reply has been set as private.

[chrisat]

Hi Radu,

sure, please give it a try. I have to remove them all anyways.
Are you sure that the design has to do with them products?
I even tried to delete them all and add my own product as new from the scratch. Same failure.

Greetings, Chris

[chrisat]

Hi Radu,

all products deleted, imported new ones. Same failure.

– the design is not like yours (kleo)
– better: you are able now to click on an item and see the details
– action corners are not fitted to the item pic
– you are not able to scroll the item pics (nav show, but no action)
– when you have 2 item pics, both are shown at the same time in full size
– integrated buy now (animated, like yours)

Please see also the screen.

Greetings, Chris

Attachments:

You must be logged in to view attached files.

[chrisat]

Solved – if anyone also needs it (works only if you use the same size as standard and only landscape!):

Just add:
.geodir_flexslider .geodir-slides img {
width: 100%;
}

At GD > Design > Scripts

Cheers, Chris

[chrisat]

Hi Laura,

yes it works fine today – I brought back all plugins to live. They were left non-activated – for test, I guess. So I was not sure if someone is still working or not.
I had to work on the installation, so I switched back online because I got no reply und changed your user to stay save…

I update your credentials, but please dont switch off all again and left it.

Thanks, Chris

[chrisat]

Thank you, rikbutterflyskull!

Much appreciated! Works perfect.

Greetings, Chris

[chrisat]

Hello,

please tell me if you are still working on it…the page is switched down since yesterday…
Have to move on.

Thanks, Chris

[chrisat]

This reply has been set as private.

[chrisat]

This reply has been set as private.

[chrisat]

This reply has been set as private.

[chrisat]

Hi Radu,

will check this at geo directory. Thank you.
I am in contact with them about the full width map we have here. They dont know how to set it up for the other pages like listing and so on. Is that a template of KLEO? Do you know how to do?

– GD Home Page (with the search bar) looks great – full width map. Is set on template using code for the header content:
[gd_homepage_map width=100% height=600px maptype=roadmap zoom=6 autozoom=true child_collapse=true scrollwheel=false marker_cluster=1 ]

Would be easy to set this for the listing pages too. But I can’t find a template or page for the listings…
Any idea to that?
The only thing I see is to set the map on top at the widgets. But those 100% width is for the content, not the page.

Please see the sample pic showing header code and widget to show the difference.

Thank you, Chris

Attachments:

You must be logged in to view attached files.

[chrisat]

Hello Laura,

thank you for your ideas. I got noticed that with geo directory plugin W3 is not allowed too. They have a own cache tool as add on. We will see.

Thank you again. Ticket can be closed.

Greetings, Chris

[chrisat]

Hi Radu,

thank you so much! Great and fast support – works. 🙂
I did change compass to 76%, now it fits perfect into the search box.

Another question to the search bar:
Is there any way to select which post type is shown at first at search drop down on the left (standard = place)?

Cheers, Chris

[Author]

Posts